[已解決]BAT如何控制ping批量運行最后由 pZjVa0 于 -7-28 21:00p.bat↓
- @echo off
- for /f %%a in (ip.txt) do start /b ping %%a
- pause
nclick="copycode($('code0'));">復制代碼
ip.txt↓
- 192.168.1.1
- 192.168.1.2
- 192.168.1.3
- 192.168.1.4
- 192.168.1.5
- 192.168.1.11
- 192.168.1.12
- 192.168.1.13
- 192.168.1.8
- 192.168.1.9
- 192.168.1.11
- 192.168.1.12
nclick="copycode($('code1'));">復制代碼
以上面為例，讀取ip.txt中每行ip并用start打開進行ping。但如果要判斷當讀取到文本的最后一段ping時，則不使用start運行，而是直接ping 最后一行的192.168.1.12，應該如何實現?謝謝效果示意:
- start ping 192.168.1.1
- start ping 192.168.1.2
- start ping 192.168.1.3
- start ping 192.168.1.4
- start ping 192.168.1.5
- start ping 192.168.1.11
- start ping 192.168.1.12
- start ping 192.168.1.13
- start ping 192.168.1.8
- start ping 192.168.1.9
- start ping 192.168.1.11
- ping 192.168.1.12
nclick="copycode($('code2'));">復制代碼
